Coaxial hard tooth surface reducer for heavy-duty mining and building materials equipment, high torque gear reducer transmission box, ceramic ball

ZL1150 gear reducer is a two-stage external meshing involute helical cylindrical gear reducer. The core principle is to reduce speed and increase torque by driving the tooth difference of the large gear with a small gear, converting the high-speed and low torque of the motor into low-speed and high torque at the output end. ‌‌
Core work logic
Input transmission: Power is input through a high-speed shaft, which drives the first stage small helical gear to rotate;
First level deceleration: The small gear meshes with the large gear on the same shaft, causing a decrease in speed and an increase in torque due to the number of driven teeth being greater than that of the driving wheel;
Second level superposition: The second level small gear coaxial with the large gear continues to drive the final level large gear, reducing speed and increasing torque again;
Output matching: The final output is through the low-speed shaft, and the total reduction ratio is the product of the two-stage transmission ratios
Key characteristics and parameters
Transmission structure: two-stage series connection, parallel axis arrangement, external meshing helical gear (smooth operation, low noise);
Speed torque relationship: Following the principle of power conservation (ignoring losses, P=T × n), the reduction in speed is equal to the amplification of torque (i.e. reduction ratio)
Model meaning: "ZL" represents a two-stage helical cylindrical gear reducer, "1150" refers to a center distance of 1150mm (a large specification), with extremely strong load-bearing capacity;
Applicable working conditions: high-speed shaft speed ≤ 1500r/min, ambient temperature -40 ℃~45 ℃, supports forward and reverse rotation and frequent start stop, widely used in heavy-duty scenarios such as metallurgy, mining, and lifting. ‌‌
Note: The ZL series is a standard universal model (such as ZL1150 corresponding to a center distance of 1150mm), which is not a special customized part. Its principle is consistent with all multi-stage cylindrical gear reducers, with only differences in size and torque capacity. ‌‌

Coaxial hard tooth surface reducer for heavy-duty mining and building materials equipment, high torque gear reducer transmission box, ceramic ball Images